Hot News
Hot News
Q&A for Wetry Stripping Machine4
Wetry Diecutting Machinery Company No. 201, Ming Shen Road, Long-Tan District, Taoyuan City, Taiwan
  We will be off for National Holiday from 2nd April to 5th April and back to office on 6th April https://www.wetry.com.tw/hot_422123.html We will be off from 2nd April to 5th April 2022-03-29 2023-03-29
Wetry Diecutting Machinery Company No. 201, Ming Shen Road, Long-Tan District, Taoyuan City, Taiwan https://www.wetry.com.tw/hot_422123.html
Wetry Diecutting Machinery Company No. 201, Ming Shen Road, Long-Tan District, Taoyuan City, Taiwan https://www.wetry.com.tw/hot_422123.html
https://schema.org/EventMovedOnline https://schema.org/OfflineEventAttendanceMode
2022-03-29 http://schema.org/InStock TWD 0 https://www.wetry.com.tw/hot_422123.html

Wetry Super Single Head Stripping Machine, beyond dual head performance!

Are you thinking to get best stripping efficiency and quality? You must check this Q&A!


Q1: Why we should buy stripping machine? What is the benefit we could get?

A1: We do believe, if you have automatic diecutting machine, then you must have stripping machine. Let’s imagine,


If you hire 10 persons for stripping jobs, USD1,000 salary/person per month, so total is USD10,000/month. Now you need only USD1,000/ month, save USD9,000 a month.

Because now you can reduce manpower for stripping from 10 to 1 person!


How much money you can save from month to month, and how much effort you can save for managing manpower?


Please note, to make it happen, you must have efficient stripping machine which can handle various kinds of shapes with very short adjusting time. Then you can expect this result.


Q2: Why we should choose your stripping machine.

A2: Whatever the machine you choose, it is a must to choose a machine that can really give help and create even higher value than it’s price, and then we can say that it’s really economic. You get what you pay. Following are the advantages if you chose us:

1.Only takes small space- Let’s compare with dual head to single head stripping machines. First obvious difference is machine size. Smallest size with most efficient performance of the world, you must have if you are diecutting factory.

                   Dual head v.s. Wetry Super Single Head 26.8% space saved!

2.Can really strip A/B side sheets- Why we emphasize it? Our Super single Head Stripping Machine is the only one of the world that can really fix well the sheets from top, and get the molds by lower pins that can perfectly fit to the mold shapes due to it’s 180 degrees turnable plate.



                                                                              A/B side

This is the only way to make sure a stripping machine that can handle most kinds of jobs with highest yield rate.  

Actually, we are the only one of the world can make it.

3.Much less adjusting time- Compare with dual head one, more head, adjusting time is actually more than double. Plus Wetry Super Single Head Stripping machine takes much less adjusting time than any other single head machines due to the user-friendly system. Shortest adjusting time of the world, double and double efficiency!

One of user-friendly systems-magnet lower pin, fixed on the 180 degrees turned plate, save much time compare with screwed lower pin

4.High yield rate- It would be even more obvious if you are handling A/B side jobs. Remain the sheets in the certain

small area, much higher yield rate you can expect! And what else you can get? Smooth stripping job without stop or crash!

Besides, small platform can ensure better flatness. Plus high quality and thick platform with special treatment, and shorter transmission route, you can expect higher lifetime of machine.


So we call our stripping machine as Super Single Head Stripping Machine. We are not dual head and beyond all single  and dual head stripping machines in the market.


We all have no idea what next order we would get. Invest for good machine will really give you help when you need. You will experience it strongly especially when you get rush orders in peak season.


Wetry Super Single Head Stripping machine beyond all stripping machines in the market, which is the only one can really fulfill your stripping demand.


Q3: Is plywood necessary?

A3: We enclose fixing bar with machines, so you can either use them, or adopt plywood. Available to install plywood expresses the high flexibility of this device. And every diemaker can offer most comment 18mm thickness plywood. Or you could order from us.


Following is the actual operation with fixing bar


Good with fixing bar :

•Short run

•Temporary order


Good with plywood:

•Long run

•High speed run

•Very complicated shapes

6662244d9931e525426ace298d814cf3.png   1f16ff5a0a7b8b9ead3d76ef4b06f0a1.png
                  By fixing bar                          By plywood

Q4: Will the top and the bottom sheets of the paper pile move when the pushing rack is working? Some of paper sheets are slippery and curve like UV-coated sheets.

A4: We have thought about this and actually this is one of our patents which ensures top and bottom sheets stay still.


Q5: What is the maximum stripping size?

A5: The maximum stripping size is 400mm x 400mm. Customization is also available.

By the way, minimum is 30mm x 50mm, also customizable.


Q6: Is it easy to operate? How long does it take to learn? Your company provides training service for the machine operation?

A6: Yes, it’s easy to operate, and we are responsible for training. Per our experience, it takes about two days to get hands on of it.


Now we would like to share with you some cases that you might encounter as well:

   1.  Curve edge + A/B side stripping



   2.  Complicated shape with big quantity- This is one of jobs from our customers and needed 10 people to strip manually. However, it’s simple case for Wetry Super Single Head. We even design die for customer so it can be stripped double mold a time! Efficiency is 10 times more and double!

                          33679b6c07e23558f481671a3d4cacbf.png              a0de5d2679b107913eca770ffbc37d00.png              

                                    Double mold stripping

   3.  Even PET is piece of cake


  • d5b85a3c5f6ff0d3bef65bfb6728dccc.png

4. When PET is easy job, you can even save time on setting lower pins with some regular jobs.

  •                     9fd03464db590ad67dc4bbf08fe02b53.png

If you have die-cutting machine, you must have Wetry Super Single Head Stripping Machine.

It can perfectly handle many kinds of shapes and materials. And it takes about 10 minutes only for adjusting. Because of small size of machine, Not only save your space but also higher accuracy due to shorter transmission distance.

We are confident, Wetry stripping machine is your best solution!